Teflex Fluorotec Forced on Sealing & Filtration for Oil & Gas, Chemical, Marine, Food & Beverage, Water Treatment, Medical, Semiconductor, Green Energy, Automotive Industries
Polyimide Filled PTFE
Description
Teflex PTFE Polyimide Seal & Gasket Are Made Of 5% -15% PI (Polyimide) Filled PTFE. PTFE Filled Polyimide Materials Is Broad Temperature Range & Chemical Compatibility. As Well As This Material With Radiation Resistant, Low Cold Flow & Superior Coefficient Of Friction etc.
Advantages
- Good Thermal Conductivity & Wear
- Superior Wear & Coefficient of Friction
- Excellent Sliding & Electrical Insulation
- Resist Chemical & Machining Properties
- Softer Mating Surface Steel | Aluminum
- Low Cold Flow & Wide Temerature Range
Properties
- Color: Yellow
- Density: 1.9±0.5g/cm³
- Tensile Strength: ≥15 Mpa
- Ultimate Elongation: ≥ 200%
- Temperature: -260°C to +260°C
Applications
- Automotive & Textile Industry
- Rotary & Reciprocating Seals
- Lip Seals | Bearings | Valve Seat
- Food & Medical Industry Processing
- Mechanical & Precision Engineering
- Bushings | Piston Rings | Chain Guides
- Stop-start | Sockets | Constructive Parts
PTFE Filled Polyimide Sheet Inquiry
| Size | Thickness | Qty/Pcs |
| 1500 x 1500mm | 0.5mm | 5 |
| 60″ x 60″ | 1/64″ | 10 |
| 1500 x 1500mm | 1.5mm | 15 |
| 60″ x 60″ | 1/16″ | 15 |
| 1500 x 1500mm | 3.0mm | 20 |
| 60″ x 60″ | 1/8″ | 20 |
| 1500 x 1500mm | 6.0mm | 30 |
| 60″ x 60″ | 1/4″ | 35 |
Polyimide-Filled PTFE Gasket
- pH:0-14
- Color: Yellow
- PTFE Polyimide
- Type: RF | FF | Custom Gasket
- Thickness 0.8 | 1.5 | 3.0 | 6.0mm
- Standard: ASME B16.21 | DIN | JIS
- Shape: Round | Square | Rectangular
- Customs: Die Cut Gasket As Drawing
PTFE Filled Polyimide Inquiry
| Size | Class | Qty |
| 2″ | 150# | 50 |
| 4″ | 300# | 100 |
| 6″ | 600# | 150 |
| 8″ | 900# | 50 |
| 10″ | 1500# | 100 |
| 12″ | 2500# | 50 |
Teflex Supply PTFE Filled Polyimide Seal | Rod | Tube Etc. and Custom Gasket As Your Drawing.