Teflex Fluorotec Forced on Sealing & Filtration for Oil & Gas, Chemical, Marine, Food & Beverage, Water Treatment, Medical, Semiconductor, Green Energy, Automotive Industries
MoS2 Filled PTFE
Description
Teflex PTFE MoS2 Seal & Gasket are Made Of 5% -15% MoS2 (Molybdenum Disulfide) Filled PTFE. PTFE Filled MoS2 Material Increases Hardness, Stiffness & Wear to Use in High-Speed & Temperature Applications.
As Well As PTFE Filled MoS2 this Material with Excellent Chemical Resistance, Low Cold Flow & Coefficient Of Friction, etc. Also Teflex Can Supply PTFE Glass MoS2, PTFE MoS2 Graphite & PTFE Bronze MoS2 Filled Materials Etc.
Advantages
- Good Thermal Conductivity & Wear
- Electrically Non-Conductive Material
- Low Cold Flow & Coefficient of Friction
- Excellent Sliding & Chemical Resistance
Properties
- Color: Black
- Density: 2.2 ±0.1g/cm³
- Material: PTFE Filled MoS2
- Tensile Strength: ≥ 20 Mpa
- Ultimate Elongation: ≥ 300%
- Temperature: -260°C to 260°C
Application
- Medium Concentrations of Acids
- Dynamic Seals | Piston Cup Seals
- Slide Covers | Bearings | Refrigerants
- Bushings | Glide Rings | Back-up Rings
- Hydrocarbons | Solvents | Water | Seats
- Cryogenics Material | Hydrogen Peroxide
PTFE Filled MoS2 Sheet Inquiry
| Size | Thickness | Qty/Pcs |
| 1500 x 1500mm | 0.5mm | 5 |
| 60″ x 60″ | 1/64″ | 10 |
| 1500 x 1500mm | 1.5mm | 15 |
| 60″ x 60″ | 1/16″ | 15 |
| 1500 x 1500mm | 3.0mm | 20 |
| 60″ x 60″ | 1/8″ | 20 |
| 1500 x 1500mm | 6.0mm | 30 |
| 60″ x 60″ | 1/4″ | 35 |
MoS2 Filled PTFE Gasket
- pH:0-14
- Color: Black
- Material: PTFE MoS2
- Type: RF | FF | Custom Gasket
- Thickness 0.8 | 1.5 | 3.0 | 6.0mm
- Standard: ASME B16.21 | DIN | JIS
- Shape: Round | Square | Rectangular
- Customs Gasket: Die Cut Gasket Drawing
PTFE Filled MoS2 Inquiry
| Size | Class | Qty |
| 2″ | 150# | 50 |
| 4″ | 300# | 100 |
| 6″ | 600# | 150 |
| 8″ | 900# | 50 |
| 10″ | 1500# | 100 |
| 12″ | 2500# | 50 |